(ION INJECTOR RF / O-RING FLANGE USE 1/4" BIT)

F5

M00 (RAISE BIT)
G00 X-0.5625 Y0.5625
M00 (DRILL WITH 1/4" THEN COUNTERSINK)

M00 (RAISE BIT: SLOT FOR HV)
G00 X-1.980 Y0.5625
M00 (DROP BIT)
G01 X-1.886 Y0.5625

M00 (CENTERDRILL THEN DRILL THE FOLLOWING WITH 0.1")
G00 X-0.2195 Y0.5625
M00 (DRILL)
G00 X-0.3910 Y0.8595
M00 (DRILL)
G00 X-0.7340 Y0.8595
M00 (DRILL)
G00 X-0.9055 Y0.5625
M00 (DRILL)
G00 X-0.7340 Y0.2655
M00 (DRILL)
G00 X-0.3910 Y0.2655
M00 (DRILL)

M00 (SWITCH TO 1/8" END MILL)
G00 X-0.5625 Y1.0000
M00 (DRILL)

M00 (SWITCH TO 1/4 ENDMILL)
G00 X-1.9375 Y1.125
M00 (DROP BIT)
G03 I0 J-0.5625 X-1.9375 Y0 (ccw circle G02 I<rel-center> J<rel-center> X<dest> Y<dest>)
G01 X-0.5625 Y0
G03 I0 J0.5625 X-0.5625 Y1.125 (ccw circle G02 I<rel-center> J<rel-center> X<dest> Y<dest>)
G01 X-1.9375 Y1.125

M00 (END)