(HV BOX TOP USE 1/4" BIT)

F5


M00 (MOUNTING HOLES)
G00 X-0.625 Y0.625
M00 (DRILL HOLE)
G00 X-3.125 Y0.625
M00 (DRILL HOLE)
G00 X-3.125 Y3.125
M00 (DRILL HOLE)
G00 X-0.625 Y3.125
M00 (DRILL HOLE)

M00 (SWITCH TO 3/4" ENDMILL)
G00 X-1.875 Y2.125
M00 (DROP BIT TO Z-0.5)
G02 I0 J-0.25 X-1.875 Y2.125 (cw circle G02 I<rel-center> J<rel-center> X<dest> Y<dest>)
G01 X-1.875 Y2.625
G02 I0 J-0.75 X-1.875 Y2.625 (cw circle G02 I<rel-center> J<rel-center> X<dest> Y<dest>)

M00 (RAISE BIT)


M00 (SWITCH TO 1/4" ENDMILL)
G00 X-1.875 Y2.125
M00 (DROP BIT)
G02 I0 J-0.25 X-1.875 Y2.125 (cw circle G02 I<rel-center> J<rel-center> X<dest> Y<dest>)
M00 (RAISE BIT)

M00 (SWITCH TO 1/2" 45DEG COUNTERSINK)



M00 (CUTOUT PLATE)
G00 X-3.75 Y0
M00 (DROP BIT)
G01 X0 Y0
G01 X0 Y3.75
G01 X-3.75 Y3.75
G01 X-3.75 Y0
M00 (DONE)