| IEC Fusion Reactor Mark 3 Servo Controller | |
 |
 |
 |
 |
 |
 |
 |
| Overview: The servo controller (Parallax USB servo Controller) can drive up to 16 hobby servos and is used to implement throttle and fuel valve control as part of the automatic reactor pressure stabilization control system that will be implemented in labview. |
|
 |
Servo Controller Box CAD (7/3/2006) |
 |
Milling Controller Box (7/3/2006) Milling off flutes to hold circuit board. |
 |
Milling Controller Box (7/3/2006) Flutes removed. |
 |
Milling Controller Box (7/3/2006) Milling holes and cutouts. |
 |
Controller Box (7/3/2006) Top panel. |
 |
Controller Box (7/3/2006) Power and USB holes. |
 |
Servo Controller Board (7/3/2006) Parallax USB servo controller. |
 |
USB Cable (7/3/2006) 1ft A to mini B |
 |
Strain Relief(7/3/2006) USB cable strain relief. |
 |
Controller Box (7/3/2006)
|
 |
Controller Box (7/3/2006) Power and USB cable. |
 |
Controller Box (7/3/2006)
|
 |
Controller Box (7/3/2006)
|
|
|
| Useful links: http://www.fusor.net/ Open Source Fusion Research Consortium. |
|
By attempting to reproduce any experiments or devices listed on this domain in part or in whole, you agree to hold me harmless against any lawsuit or liability. Copyright © 1998 - 2005 by Andrew Seltzman. All rights reserved. |
|
| Contact me at: admin@rtftechnologies.org | |